Erskine Attachments LS 24, Руководство оператора

Страница: 10 / 16

10
ROUTINE MAINTENANCE
Lower the attachment to rest flat on the ground, make sure wedge is in fully open position,
shut down the engine, relieve the hydraulic pressure to the attachment, set the park brake, and wait for
all motion to stop before leaving the operator’s seat to perform service of any kind.
It is the operator’s responsibility to make daily inspections of the loader and attachment for damage, loose bolts,
fluid leaks, or anything else that could cause a potential service or safety problem. Preventive maintenance is
the easiest and least expensive type of maintenance.
IMPORTANT: Bolts can loosen after initial usage. After the first hour of operation check all bolts.
Periodically clean debris and small wood chips off of
the log splitter.
Grease frame slide after every
40 hours of operation.
It is recommended to coat the slide with a light layer
of grease before long periods of storage to prevent
rusting.
40