ERS AK 6000, Руководство пользователя

Страница: 4 / 16

AK6000 - prevádzkový manuál
This automatic system is intended to control the producing of heat-water or heat-air in wood gasyfying boilers. Basic principle of the
function is regulation of the water temperature by means of setting the amount primary air in combustion fireplace of boiler.
Supply of air is controlled by continous influence to the suction fan operating speed.
Two electronic modules create basic composition of the AK6000.0
AK6000D – Control Unit AK5000S – Power Board
Grafic LCD display, 128x64 pixel, LED backligt Two level power source 230VAC / 24 and 9 VDC
Five point touch-button Two fan outputs - main fan and auxiliary fan
Duo LED ( red / green ) Water-pump output
20 pin connector to connect power board Four temperature sensors T1..T4
!
Two independent fuses F1,2/0,8A save system parts and fans in malfunction

Adjusting boiler by means of the LCD display, signal DuoLED and five
arrow button

Water temperature PID control in adjustable range 60 ÷ 85 °C by means
of the continuous regulation of the fan

Water pump switching in pulse mode provides suppresion of the low-
temperature corrosion

Two temperature sensors connection option: T1 (water sensor) and T2
(combustion sensor)

Emergency heat thermostat conecting option

It is possible to expand the basic configuration by Lambda-probe board or Ethernet board for remote control.
CONTROL SYSTEM CONFIGURATION
Basic Configuration
AK6000.0
Basic Configuration Functions
AK6000.0