AK3000
– User Manual
In this section we can manually activate connected components as fans or water pump for service purpose.
!
Improper setup of service parameters can result in risk of boiler incorrect behaviour
or damaging some amount of boiler. Just the qualified service can properly act in this area.
You need to TURN OFF the boiler before setting in this area.
Starting at basic view we must hold the button
ENTER
two seconds long. One click on the button
▲
will get us to the frame2.
By means of the
▲
or
we can set the first flashing digit of the
PIN xxxx
and by
ENTER
button we confirm it. So we can
enter rest of the PIN. With
ENTER
button we can get to the frame 2.8. Subsequently by means of the
▲
and
ENTER
button we can depict frame 2.8.15 with set of outputs:
Using buttons
▲
or
we can choose required output then by means of
ENTER
button to turn it ON or OFF:
Output – main fan is OFF
ON / OFF
Output – auxiliary fan is OFF
ON / OFF
Output – water pump is OFF
ON / OFF
Output – OPEN secondary servodrive is OFF
ON / OFF
Output – CLOSE secondary servodrive is OFF
ON / OFF
Inicialization secondary servodrive is OFF
ON / OFF
Output – expander relay 1 is OFF
ON / OFF
Output – expander relay 2 is OFF.
ON / OFF
Output – expander relay 3 is OFF
ON / OFF
Component Service Activation
AK6000.X
Содержание AK 6000
Страница 16: ...AK3000 User Manual BLOCK DIAGRAM AK6000 X...
