8
Complete programming chart (2)
Note (Parameter F3)
Please set F3 Function after system learning. The LED display 10 to indicate all of the recorded values will increase 1 ampere as
the over current value. In other words, the LED shows 20 to indicate all the recorded values will increase 2 ampere as the over
current value. The value can be adjusted by pressing button UP and DOWN. The maximum value is 40(4.0A) and the minimum
value is 05 (0.5A)
LED Display Definition Parameter
Mode
Description
Photocell1
Photocell2
Buzzer Function
Reverse Impulse for
Electric Lock
Open/Stop/Close/Stop
Function key
Pedestrian Mode Function
key
Auto-Close Function key
FC
FD
FE
FF
FG
FH
FI
FC-0
FC-1
FD-0
FD-1
FE-0
FE-1
FF-0
FF-1
FG-1
FG-2
FG-3
FG-4
FH-0
FH-1
FH-2
FH-3
FH-4
FI-0
FI-1
FI-2
FI-3
FI-4
OFF
ON
OFF
ON
OFF
ON
OFF
ON
A key
B key
C key
D key
OFF
A key
B key
C key
D key
OFF
A key
B key
C key
D key
1. The factory setting is "FC-0".
1. The factory setting is "FD-0".
1. The factory setting is "FE-0".
1. if the Function is on, the gate will move forward a
little before the gate operate for releasing the Latch
2. The factory setting is "FF-1".
1. The factory setting is "FG-1".
1. The factory setting is "FH-2".
1. The key is to turn on or off the Auto-Close Function.
2. The factory setting is "FI-0".
3. When the flasher and buzzer is running, the auto
closed button has no Function till flasher and buzzer
finish running.
