12
5
MAINTENANCE AND USE
WARNINGS FOR SCRAP
The product should be dismantled by qualified personnel at
the end of its working life.
This product consists of a variety of materials, some of which
can be recycled and others which must be disposed of. Users
must be aware of the different recycling and disposal systems
envisaged in local regulations.
Some parts of this product may contain contaminating or
hazardous substances which, if released, could harm the
environment and human health.
Discarding this device along with household
waste is forbidden. Carry out selective sorting
according to local regulations.
Manual operation SNC4560(M)
Fig. 5:
position the crank (not supplied) in the coupling (5) and
turn it in the required direction.
Troubleshooting
•
The operator stops working following prolonged use: the
thermal protection device has cut off the operator in order
to prevent excess heating; the operator will work again
once it has cooled down.
•
The open/close is incorrectly adjusted: check that the crown
(9) rotates along with the tube (T) and with the limit switch
ring (10).
