Erreka LINCE LIS424, Руководство по установке

Страница: 54 / 108

Instalacion_V.1
.fm - 25/6/09
INSTALLATION
50
Installation Manual
3
ACTUATOR INSTALLATION

Procedure
Secure the base plate to the floor
AB
1 Position the ducts (1) for electrical installation.
2 Secure the base plate to the floor, taking into
account the assembly levels.
O
BEWARE: the base plate is not symmetric (a > b)

In order to secure the plate to the floor, use one
of the two methods described below:
A- Using screws or lag screws
• Introduce the screws or lag screws (2) through
the grooves (3) of the plate.
B- Using the tabs
• Fold the tabs (4) of the plate at the height of the
groove (3).
• Fold the base (5) of the tab (fold each part in one
direction in order to ensure attachment to the
base plate).
• Introduce the tabs on the base plate, which is still
wet, until the edge of the base plate is supported
on the floor.
1 Gate
2 Rack
3 Base plate
O
BEWARE : the base plate is not symmetric
(a > b)
4 Drive pinion
5 Ducts for electrical installation
Assembly positions and levels
LINCE idiomas.book Page 50 Thursday, June 25, 2009 12:50 PM