9
BUL
Quick installation and programming guide
MSB-017/00
IMPORTANT
NOTE
This quick guide is a summary of the complete installation manual. The manual contains safety warnings
and other explanations which must be taken into account. The installation manual can be downloaded
by going to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
E187A
2x1mm
2
2x0,5mm
2
8m
MOTOR
ENCODER
TC
TA
TA
TC
Elements of the complete installation
Electrical cabling
A
: Main power supply
B
: Flashing light
C
: Photocells (Tx/Rx)
D
: Pushbutton or key switch
E
: Operator (motor + encoder)
F
: Antenna
The
TC
closing stopper must be
installed.
The
TA
opening stoppers are only
necessary in outward opening
facilities.
The optional NBULR kit is available for outward opening facilities; this is a special wall bracket which
allows multiple mounting positions, thus making it easier to install the operator.
800
G187B
3,5
Limits on use
G187A
800
We recommend using an electrolock for leaf lengths of over 2.5m.
Values for orientation purposes only. The shape of the leaf and the presence of strong wind may
bring notable differences in the values of the chart.
BL33 (short)
BL43 (long)
