11
D187A
D187B
1
3
Unlocking
•
Insert the key (1) and turn until the cylinder (2)
protrudes a few millimetres.
•
Turn the handle (3) 180º, until the cylinder coincides
with the
$
symbol.
Unlocking for manual operation:
Motorised operation locking:
•
Turn the handle (1) 180º, until the cylinder coincides
with the
%
symbol.
•
Insert the cylinder (2) by pushing and cover it (3).
1
3
D187A
A
P187A
B
P187E
1
Mount the wall support.
Levels A and B are measured from the centre of the
hinge to the centre of the bracket orifice.
P187B
P187C
P187D
Assembly
2
Mount the operator on the wall support.
3
Position the gate support.
Bear in mind that the operator must be horizontal.
4
Mount the operator on the gate support, adjust the
swivel joint and position the protective cover.
5
Install the opening stopper.
For inward opening
: open the
gate manually and install the
operator opening stopper (see
figure).
For outward opening
: install
the TA stoppers (see "elements
of the complete installation").
