Errebi 3-CODE, Руководство пользователя

Страница: 89 / 104

www.
errebi
spa.com
89
ENGLISH
3-CODE
9.5 CUTTING INFORMATION (FILE)
Once the program is connected to the 3-CODE in the ERREBIKeyPro program, we have access to see the technical
information for cutting the key. If there is no link with the 3-CODE machine, this information is not accessible. We can
differentiate the files into two families, according to the attaching area and the cutting tool to be used, therefore, we
can denominate the following divisions:
a) Toothed key files Keys cut with the horizontal tool and where we have the MP1 jaw with four sides, the possi-
bility of changing to other jaws, personalization of special key profiles.
b) Dimple or laser key files Keys cut with vertical tool, the jaw of this area has interchangeable clamps according
to the model of key, the software will notify us of the clamp needed at all times. The machine will have to be ad-
justed each time the clamps are changed.
9.5.1 TOOTHED KEY FILES
When searching for a key (AZBE) or a biting code (e.g. 15000J) we can see its mechanical data by clicking on top of
the file (in this case 507).
When clicking on the file we enter the file screen where we can see the technical data of the key and it will tell us how
to attach the key, (side of the jaw, limit...).