Errebi 3-CODE, Руководство пользователя

Страница: 64 / 104

64
ENGLISH
3-CODE - User manual
FIG. 13
3 CLAMPS
The machine consists of two clamps, one for machining flat keys and another for dimple and/or laser keys. The use of
the two clamps for correct operation is detailed below.
3.1 CLAMP FOR FLAT KEYS
3.1.1 USE OF THE STANDARD CLAMP “MP1”
The standard clamp “MP1” is designed for reading and machining flat keys. When attaching the key, consider two
aspects: Side and key limit.
• Sides 1, 2, 3 and 4 of the standard clamp “MP1”.
The different sides and characteristics of the key to be attached are indicated below:
a) Copying a key with rear support.
Side 1: keys with normal blade
Side 2: keys with narrow blade
b) Copying of keys by means attaching the key by its profile
Side 3: Key with guide in lower part
Side 4: Key with guide in upper part
Representation of standard clamp with images of different attaching (Fig. 13)
The standard clamp has 4 sides, (numbers engraved on the top part of the clamp)
that allow closing the attached keys on the rear and profile. The clamp is designed
to hold different models of keys. The side change is simple, leave the clamp slightly
open, and manually turn the key to the desired side.