GUARANTEE
The warranty period for this product is 60 months, beginning from the manufacturer date. During this period, if the product does not
work correctly, due to a defective component, the product will be repaired or substituted at our discretion. The guarantee does not
cover the plastic container integrity. After-sale service is supplied at the factory.
Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
12
Menu Config
14
Memorization Plus
13
Backup / Restore
(*) : Push the button of the new transmitter
before the end of the beep.
NOTE : If the option «PLUS LIMITED» is set, the transmitter which «opens» the memorization can be only the first transmitter memorized.
If the option PLUS is OFF the remote memorization is disabled.
If the option PLUS is ON the remote memorization of a new transmitter can be done using any transmitter already in memory.
The memorization PLUS is active only if there is, at least, one transmitter in the memory. When the memory is empty, the memorization of the first
transmitter can be effected only using the buttons P1 and P2.
!
(*) Attention : this operation will overwrite all data of the internal memory
Manufactured by : CDVI WIreless SPA - Via Piave, 23 - 31020 S.Pietro di Feletto (TV) - Italy
Tel : +39-0438-450960 - Fax : +39-0438-455628
web: www.erone.com - email: [email protected]
Allows to set the operating mode of the relays R1, R2, R3 or R4, as Pulse, Step or Timed. In case of Timed it’s possible to set the delay
time from 1 sec. to 24h: 59 min.
Select PULSE, STEP or TIMED with P2
Set the desired delay time using P2 to scroll the digits and
P1 to confirm and shift to next : the time is expressed in
hours , minutes and seconds
External
Internal
External
Internal
Save
Restore (*)
MEM.
MEM.
MEM.
MEM.
Allows to create a backup of the memory data base and save it onto an external
memory ( fig. 6)
Plug-in the memory in the proper receiver connector
The memorization PLUS allows to add a new transmitter remotely, without using the push-buttons P1 & P2. It’s enough to use a transmitter «Ma-
ster».
A transmitter «Master» can be :
1) the first transmitter added;
2) any transmitter memorized and changed as «master» using the Add Master submenu ;
The PLUS feature can be : ON, Limited or OFF
•
Plus ON
: remote transmitter memorization enabled;
•
Plus Limited
: remote transmitter memorization enabled only using a TX «master» ( see fig. 7 );
•
Plus OFF
: remote transmitter memorization disabled;
Fig. 7
Fig. 6
ERONE
XPL54
