Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
www.erone.com - www.cdvigroup.com
9
Menu Add
(*) NOTE
: The first TX added acts as Master: that means that it can be used to add more tx using the PLUS option.
The submenu Add Master allows to assign the Master property to any other TX already in memory even not memorized on the first position.
Once a TX has been assigned as Master, its property cannot be removed unless to delete it from the memory using the Delete menu.
The transmitters «Master» are identified with the «#» in the list.
10
Menu Delete
11
Menu Info
Delete TX :
Delete a transmitter. It’s necessary to have the transmitter available because the
system requires the RF transmission;
Delete Button :
Delete the single button of a transmitter;
Delete by List :
Delete a transmitter from a list. In this case it is enough to know the S/N of the
transmitter to delete to complete the cancellation;
Delete All TX :
Delete all transmitters;
Delete setting :
Reset to factory default: delete all the transmitters and reset the operating mode of
the relays to PULSE.
For all the options, use P2 to scroll and P1 to confirm
Info relays :
Display relays operating mode
Info N. Users :
Display number of Tx memorized
Info List :
List of Transmitters
Info Version :
SW release.
For all the options, use P2 to scroll and P1 to confirm
Enter the number
of TX [1 < n < 500]
Push Button of the TX
to store as Master (*)
Push TX
Button
Push Button
of the first TX
Press the transmitter buttons
which activate Relay 1 and
press P1 to confirm
Example: Relay 1 of the full block
will be activated by buttons A
and C
Example: Relay 2 of the full block
will be activated by buttons A,C
and D
Press the transmitter buttons
which activate Relay 2 and
press P1 to confirm
Block memorization
