Installation Guide
www.ernitec.com
3
Warnings and Cautions
riking, shaking, etc. The camera could
Ask qualified personnel of electrical wiring for the installation. Please note
0%.
The camera is capable of surge protection; ensure AC power model unit
against damage of heavy current or electric
•
s. There are no
service person for servicing.
fan inside. Blocking the cooling holes leads to
rature,
umidity or power source ratings
tween -50°C ~
low 90%.
g the camera
era when it is dirty. In case the dirt is hard
to remove, use a mild detergent and wipe the camera gently.
•
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or
not, never aim it at the sun or other extremely bright objects. Otherwise,
the camera may be smeared or damaged.
•
Handle the camera carefully
Do not abuse the camera. Avoid st
be damaged by improper handing or storage.
•
Installing electricity wiring carefully
that input electricity to the unit is at tolerance of AC 24V ± 1
grounded appropriately
shock.
Do not disassemble the camera
To prevent electric shock, do not remove screws or cover
user serviceable parts inside. Ask a qualified
•
Do not block cooling holes on the bracket
This camera has a cooling
build up of heat the camera and may cause malfunction.
•
Do not operate the camera beyond the specified tempe
h
Use the camera under conditions where temperature is be
50°C (-58°F ~ 122°F), and relative humidity is be
•
Do not use strong or abrasive detergents when cleanin
body
Use a dry cloth to clean the cam
