ERIS3000
7
To Define Recording Settings:
•
Select
<
Record Setup
> from the OSD main menu.
•
Select
<
ezRecord
> as
Preset Configuration
option, and select wanted number of recording
day; other setting will be automatic arranged by the unit.
•
Consider your own needs and select a
Preset Configuration
setting from <
Best Quality
>,
<
Standard
>, and <
Extended Record
>. Detailed information refers to ERIS series DVR User’s
Manual, Preset Record Configuration.
•
Adjust the Recording schedule, Pre-alarm, Circular and Audio parameters.
•
When the settings are complete, press
ENTER
to confirm and save the settings; or
ESC
to
abort.
To Select Viewing Mode:
•
Press
MODE
button repeatedly to select the desired display mode. The available viewing
modes are full-screen, 2
×
2, 3x3, and 4
×
4 split-window.
Network Setup
Using LAN / Cable Modem:
Configure the LAN setup when you plan to use a LAN, WAN, or Internet connection without a dialup
modem. It requires an Ethernet connection to a network. The default ID of your ERIS DVR series
must be changed to avoid network conflicts.
•
From Main menu, select <
System Setup
>
Æ
<
Network Setup
>, set the <
LAN Select
> item to
<
LAN
> or <
PPPoE
> according to your network application, and enter <
LAN Setup
>.
•
For DHCP user, set the DHCP to <
ON
>. The IP address, Netmask, Gateway and DNS settings
are retrieved from network servers. DHCP is dynamic that the settings change from time to time.
•
For Non-DHCP user, set the DHCP to <
OFF
>. You must enter an IP address, Netmask,
Gateway and DNS settings. Please obtain the information from your network service provider.
•
To change the IP address, Netmask, Gateway and DNS value, press
UP/DOWN
keys to move
the cursor to the item. Use
LEFT/RIGH
T keys to access each section of the value and press
ENTER
, then change the value using
UP/DOWN
keys.
•
PPPoE users must set the <
PPPoE Account
>, <
PPPoE Password
> and <
PPPoE Max Idle
>
as well.
•
When the settings are complete, press
ENTER
to confirm and save the settings; or
ESC
to
abort.
