14
-
Detected Area Setup
The Detect Area is displayed as follows after selecting this item. The
detection area consists of 165 (15×11) detection grids.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Use the Direction keys to move the cursor and press ENTER to enable or
disable a grid. Press MODE to select all of the grids for detection; press
MODE again to de-select all of the grids.
-
Sensitivity
The item is used to set the sensitivity of detection grids for the camera. A
greater value indicates more sensitive motion detection. A motion alarm will
be triggered once the amount of motion detected exceeds the Threshold
value
Move the cursor to <Sensitivity> and press ENTER, and then use UP /
DOWN keys to adjust the value. The value is increased by 4% increment.
-
Area Threshold
<Area Threshold> means the motion alarm triggered level. If the
percentage of triggered grids from the total detection area is greater than
the set value, the motion alarm will be triggered.
For example, if 10 grids are selected and the < Area Threshold > value is
70%, the motion alarm will be triggered when 7 grids are motion detected.
Move the cursor to < Area Threshold > and press ENTER, and then use UP
/ DOWN keys to adjust the value. The value is increased by 1% increment.
