13
< Per Channel Config >
This menu is used to configure the <Video Loss Detect>, <Motion Detect>, <Alarm In> and <Alarm
Out> settings for each channel. The menu is displayed as below.
Per Channel Config
1. Channel Select
2. Video Loss Detect
3. Motion Detect
4. Detection Config
5. Alarm In
6. Alarm Out
CH1
ON
ON
OFF
None
Channel Select
The item is used to select a desired channel for setting the parameters. Move the
cursor to <Channel Select> and press ENTER, then select a channel using UP /
DOWN keys. Press ENTER again to confirm the setting.
Video Loss Detect
This item allows users to enable / disable Video Loss acknowledged as an alarm
event. Select <ON> to enable Video Loss acknowledged as alarm events, <OFF> to
disable.
Motion alarm Setup
Motion Detect
Use to enable or disable the motion detection function of the
Premium H.264 DVR
. If
motion detection function is enabled, it is required to define the motion detection
parameters such as detection area and sensitivity settings.
Detection Config
If motion detection function is enabled, it is required to define the motion detection
parameters such as detection area and sensitivity settings. Select a channel for
setting the parameters, move the cursor to <Detection Config> and press ENTER.
The Detection Configuration menu displays as follows.
Detection Config
1. Detected Area Setup
2. Sensitivity
3. Area Threshold
88%
6%
40%
▲
