Ernex AS Norsaw 250, Руководство пользователя, Страница: 3 / 26

3
1. SAFETY INSTRUCTIONS
The European Union Machinery Directive 2006/42/EF, 2006/95/EF and EN 1870-5:2,
requires manufacturers, importers, suppliers and dealers to ensure that machines are
designed and built to avoid causing injury to users and others by accident or inappropri-
ate work posture or strain. Machinery used at a workplace must - wherever practicable - be
secured and pose no risk to operator health during installation, operation, cleaning or mainte-
nance.
Persons who will use the equipment must receive the necessary information on operation,
usage and precautions necessary for safe operation without risk to life or health.
The Directive applies to purchase, resale (wholesale, retail), leasing, short and extended
hire, and hire-purchase.
Persons installing the machines at a workplace are required under the regulations to ensure
that - wherever practicable - no aspect of the installation has rendered the machine unsafe
or causes it to pose a hazard at any time during assembly, use, cleaning or maintenance.The
Directive also covers assembly, electrical hookups, accessories, safety features and extrac-
tor fans/ ventilators. Make sure there is sufficient light and space before commencing instal -
lation.
The Norsaw 2003 comes complete with the safety features enabling the operator to comply
with the regulations. Details on correct installation and use, combined with a guide to instal-
lation and proper adjustment of the safety systems, are described in this User Guide.It is an
absolute requirement under the Directive that the employer and employee shall ensure
themselves that all safety features are properly installed, adjusted and maintained and that
personal protective gear is worn.
Repairs and maintenance must only be done by a competent person. Be sure to check that the
power supply is off and the plug is out before starting a maintenance procedure. Instructions
for maintenance procedures are included in this User Guide.
The machine operator must receive adequate training and instruction on the hazards of the
machine and the precautions that must be observed and the actions that the law requires of
him, or alternatively must work under the close supervision of a person thoroughly familiar
and experienced with the machine who knows and understands the proper precautions to be
taken.
Persons under the age of 18 years must take and pass an approved HSE course before us-
ing the machine at the workplace except when on a training course under adequate supervi-
sion and guidance.
The saw is ideal for use with wood, plywood and chipboard.
The saw must not be used on plasterboard, polysterene and tarred paper (for roofing).
WARNING: Safety equipment such as riving knife, blade guard and push sticks must not be
removed, but have to be used.