Use and maintenance manual
Automatic conveyor belts punching machine
Model: PAF-301
____________________________________________________________________________________________________________________
P a g . 1 2
Push blue button RESET MACHINE to reference servomotor in 0 point.
Now, the machine is ready to operate and everything is positioned.
Assemble the desired punching head (see page 25)
We shall verify that the regulator pressure is between 0.05 and 0.8 Mpa, depending on the cut
diameter set-up and the belt thickness.
Safety systems and messages:
This punching machine is equipped with the following safety systems:
1-
Emergency Stop
This system allows performing a stop at any moment with the three buttons located on the
upper and frontal panel of the power panel and back of frame. We must unlock the button and
then press RESET BUTTON of control panel and RESET MACHINE on screen to reposition the
cutting head to its initial position.
2-
Spindle Drive Not Positioned
This device prevents the cutting head from cutting if it is not positioned in its 0 starting point.
Press on RESET MACHINE on the screen in Operation Mode to reposition the cutting head to its
starting point.
3-
Cross Entry Safety barrier // Cross Exit Safety barrier
This device detects that one or two barriers are crossed.
Automatically deactivates.
