Use and maintenance manual
Automatic conveyor belts punching machine
Model: PAF-301
____________________________________________________________________________________________________________________
P a g . 1 0
To start a job, introduce the end of the belt to be punched on the right side of the machine,
passing the belt below the hold-down bar.
REMARK:
DO NOT MOVE the left guide position, “0” point of step motor is aligned with this
reference.
Ensure that the belt is properly placed on the wheel of the measurement encoder,
completely tangential to the left guide of the table up to the drive rollers. You can adjust the
height wheel pressure depending on the belt thickness.
Once the initial end has been introduced, adjust the two right guides to prevent the material
from suffering any displacement.
Lower the pressure role with the black button of frontal panel to get it fixed, allowing belt
progress in automated mode.
