Use and maintenance manual
Auto-Puncher for conveyor belts
Model: AFP-200
____________________________________________________________________________________________________________________
P a g . 1 4
Check the STEP is correct. If not, use the STEP button and input the required value with between
5 and 30 then press ENTER.
NOTE:
The values programmed shall not be lost, even when the equipment is switched off; the
program always memorizes the last values input.
We press START to begin cutting at the first end.
NOTE:
During the cutting process, no programmed value may be changed, except the cutting
time. To do so, we press STOP after change that value with TIME button enter the value
between 03 and 07 and ENTER to save that value, Them, press START to continue.
