Use and maintenance manual
Manual die cutter
Model: F-121
____________________________________________________________________________________________________________________
P a g . 8
We will introduce the new cutting head from the same side.
And we will fix it later with the knob (
B
)
WARNING:
When assembling the 80x10 cutting head it is very important that the head is always
positioned in DF. Otherwise, ST1 and ST2 may break the blades on the side guides.
Initial cut measurements before die cutting.
In both types (80x10 and 50x20 double) we will have to cut the belt
100mm longer
from the
measure of the final development once it is joined.
Due to the short length of the side guides, it is necessary to cut at 90º with extreme precision.
The positioning reference of the end of the nylon board will determine the straightness of the
splice.
For double die cutting, a minimum of
95mm fabric opening
is required.
(B)
