Use and maintenance manual
Manual die cutter
Model: F-121
____________________________________________________________________________________________________________________
P a g . 1 1
Operation
We will introduce the first end of the belt with the transport or cover face upwards, lifting the
clamping bar through the clamping flanges.
The belt must be inserted until the end of the Nylon plate and well tangent to the initial guide
marked with a green dot (
0
).
Descend the holding rod by activating the pressure flanges of the clamp on both sides of the
bench.
We will adjust the
pressure regulator knob
at the 0º point.
To adjust the regulator knob, we will pull the knob out to unlock it.
