19
Admissible weights on worksurfaces
The chart below reflects loads that are evenly distributed across the work surface
Trespa
®
Top Lab
PLUS
Stainless steel
work top
Captair Bio 320 Smart
35 kg
35 kg
Captair Bio 321 Smart
35 kg
35 kg
Captair Bio 391 Smart
50 kg
45 kg
Cleaning and maintenance
- Mechanical item checks
Hinges:
Hinges must be properly attached and must allow any items on the front side of the workstation to be instantly and easily lifted
upward.
Acrylic Parts:
Ensure the transparency of the panels is a part of regular maintenance for the enclosure.
- Cleaning the enclosure
The enclosure must be cleaned on a regular basis.
This may be accomplished in several ways:
- With soapy water followed by rinsing with clear water and drying with a soft, non-abrasive absorbent paper towel.
- Or with a commercial pH neutral neutralizing product followed by drying with a soft, non-abrasive, absorbent paper towel..
- or with a non-alcoholic disinfectant detergent.
Coated Metal Parts:
- These must be inspected and free from any traces of corrosion.
- Check that there is no stagnant water in the spill tray.
- Clean the spill tray if necessary.
