6.1
Upper tube mount. Locate upper tube #SB-S006, hold the
upper tube with the expanded end pointed down, this end
will slide over the lower tube.
(Figure 6.1)
6.2
With the upper tube mounting hole aligned with the lower
tube mounting hole located on the sides of the tubes place
the upper tube over the lower tube. NOTE: make sure that
the upper tube bend is facing the mailbox as shown in a
vertical plane.
(Figure 6.1)
6.3
Next place one 3/8 – 16 X 3 ¼ bolt #SB-F009 through the
upper and lower tubes. Use a 3/8 Nylon head locknut
#SB-F010 and secure tightly, again making sure that the
tube assembly is vertical straight and the upper tube bend
is facing the mailbox.
(Figure 6.2)
Step 6 Fasteners used
• Bolt #SB-F007
• Nylon Top Locknut #SB-F008
Step 6 Tools needed
• Socket Wrench Set
• Adjustable Wrench
Step 6 Assemble Upper Mount Tube
#SB-F009
#SB-F010
Figure 6.1
Figure 6.2
#SB-S006
- 6 -
