Log On / Off
If you logged on successfully, the display will display
your extension number and
SEARCH
soft-key, and the
phone is ready for use (idle state - See Figure1).
Press the
LOG-ON
soft-key
LOG-ON
Key in your Alias 2 (and optionally your pin2 code)
On the Address settings menu screen (See Figure 5),
Select
Alias 2
(Press ‘
i
’, ‘
j
’ button )
If only the Alias 1 is registered , the display shows your
extension number,
LOG-ON
soft-key, and the IP phone
is ready for use (idle state).
Figure 5
10
IPW2000
If ”
NOT REG.
“ is displayed on the screen after you
make an attempt to log on, enter a PIN number using
the following procedure
Enter your PIN number
Press the
LOG-ON
soft-key again
LOG-ON
On the Address settings menu screen,
Select
PIN 1
or
PIN 2
(Press ‘
i
’, ‘
j
’ button)
Note
: the same PIN is used for both Line1 and Line2
