Log On / Off
Log on
displays your alias number.
If the displayed Alias number is not yours,
delete the displayed number by using the following
procedure
All the parameters for your IP phone must be set by the system administrator before
you can use the IPW2000. When this is done, and the IP phone is connected to the
local network(LAN), your IP phone initiates the start-up procedure automatically
when you connect it to the mains.
When your phone is properly installed and connected to a power source
the
LOG-ON
soft-key on screen is displayed. (See Figure 3)
Press the
LOG-ON
soft-key. Verify that the Phone
Key in your Alias 1 (and optionally your pin1 code)
On the Address settings menu screen (See Figure 4),
Select
Alias 1
(Press ‘
i
’, ‘
j
’ button )
LOG-ON
Figure 3
Figure 4
9
IPW2000