Ericsson TH688 Скачать руководство пользователя страница 44

Страница: 44 / 56

How to Erase a Message

❶

Press NO if you do not want to reply to a message.
The message Erase? appears.

❷

Press YES to erase the message from the Messages memory.

You will now automatically come to the next message in the message
list.

Note! You can press CLR anywhere within the menu to erase a message.
When the message Erase? appears, press YES.

How to Store the Message

●

Press NO if you do not wish to erase the message.

The message will remain in the Messages memory.
The message Store? appears.

●

Press YES to store the message in the SIM card memory. The
message is erased from the Messages memory.

The display will now show the position of the
message.
For example that it is the third of five messages that
can be stored.

●

Press NO if you do not want to store the message in the SIM card
memory. The message will remain in the Messages memory.

How to Call a Phone Number in a Message

●

Press YES to call a phone number found in the display to call the
number direct.

After the number has been called, the message is considered read and it
remains in the Messages memory.

How to Read Stored Messages

❶

Select Read messages from the

MAIL

menu.

❷

Scroll with the right and left arrows until you find the message you
are looking for.

●

'New’ stands for a new unread message.

●

'Old’ stands for a read message.

●

'Sent’ stands for a sent message.

●

'To Send’ stands for a composed, but not sent message.

❸

Press YES.

❹

Read the message as described in How to Read a Message, p. 35.

Note! If there is a * in front of the message, this means that it is stored
on the SIM card.

How to Send Messages

❶

Select Send messages from the

MAIL

menu.

❷

Press YES.

New appears in the display.

❸

Press YES to enter a new message.

An empty display appears.

❹

Enter your message.

You can backspace with the left arrow and erase characters to the left
of the cursor or insert characters in the cursor’s position.

❺

Press YES when you have completed your message.

❻

Press YES if you wish the receiver to reply to the message. Press NO
if you do not.

❼

Enter the receiver’s phone number or recall it from the phone book.
To access the phone menu, press the left arrow.

❽

Press YES to send the message now or NO to store the message for
later use.

If you decide to send the message later, the message is labelled Written
instead of Sent when you access the message.

How to Repeat a Message

Sometimes you may want to repeat a message when the receiver could
not be reached. You can instruct you Service Centre to repeat a message
for a certain amount of time: 1 hour, 12 hours, 1 day, 1 week or
maximum (depending on your operator).

❶

Select Send messages from the

MAIL

menu.

❷

Scroll to Options and press YES.

❸

Press YES to select the Valid per option.

EN/LZT 126 1452 R2A

Stored on

card
3(5)

Содержание TH688

























































Результаты поиска

Содержание TH688

Отзывы:

Похожие инструкции для TH688

Бренды по названию

Популярные бренды

Ericsson TH688, Руководство пользователя

Результаты поиска

Содержание TH688

Отзывы:

Похожие инструкции для TH688

Бренды по названию

Популярные бренды