Protecting Your SIM Card and Phone
The Card Lock
Your SIM card is protected by a card lock which is unlocked with a PIN
code. The PIN code is obtained when you purchase your SIM card.
Each time you turn on your phone, the PIN code has to be entered to
unlock the card.
If the PIN code is entered incorrectly three times in succession, the SIM
card will be blocked. This is indicated by the message Card blocked
Unblock? Should this happen, see Problems You Can Solve, p. 44.
How to Change the PIN Code
❶
Select Change PIN code from the
ACCESS
menu.
❷
Enter the old (current) PIN code and press YES.
❸
Next, enter the new PIN code and press YES.
❹
Finally, at the prompt Repeat new PIN, enter the new PIN for the
second time.
The message New PIN confirms that the PIN code has been changed.
If the message WRONG PIN appears in the display and the phone
returns to standby mode, your PIN code has not been changed. Your old
PIN code was entered incorrectly. Repeat the procedure above.
Note! If the message Matching error appears, the new PIN was entered
incorrectly.
How to Change the PIN2 Code
Depending on the network you use, some services require that you enter
a second PIN code, the PIN2 code.
●
Select Change PIN2 code from the
ACCESS
menu.
Follow the same procedure as described in How to Change the PIN code
above.
How to Unlock the SIM Card
Note! This function only applies if your SIM card allows you to
de-activate the card lock.
❶
Select Unlock card from the
ACCESS
menu.
❷
Press YES.
❸
Enter your PIN code and press YES.
The message Unlocked confirms that the card lock is now deactivated.
How to Lock the SIM Card
❶
Select Lock card from the
ACCESS
menu.
❷
Press YES.
❸
Enter your PIN code and press YES.
The message Locked confirms that the card lock is now activated.
The Phone Lock
The phone lock protects the phone against unauthorised use in the event
of theft. It is not activated when you purchase the phone. You should,
however, activate the phone lock as soon as possible and also change the
factory-programmed security code of 0000 to any 3- to 8-digit personalised
code.
Note! If you forget your security code, you need to contact your dealer
to unlock your phone. For security reasons, this may take some time.
There are two different types of phone locks – Full lock and Autolock.
Full Lock
If the Full Lock is activated, the message Phone locked is displayed
briefly, each time the phone is turned on. The message is followed by
the prompt Enter lock code. The user then has to enter a security code
and press
YES
to be able to use the phone.
Autolock
If the Autolock is activated, the message Phone locked and the prompt
Enter lock code will not appear until a new SIM card is inserted into
the phone. After the security code has been entered correctly, the phone
can be used with the new SIM card. The user will not be asked to enter
EN/LZT 126 1452 R2A
19
Содержание TH688
Страница 8: ... ...
