Ericsson RBS 2409, Инструкция по установке, Страница: 9 / 16

Installation Procedure
4.2.1 Installing the Wall Plate
1. Place the wall plate in a vertical
position where the RBS is to be
located.
Make sure the hole for the cable
cover is facing upwards.
P018100A
Up
2. Install the wall plate and secure it in position.
Note: Depending on the wall, it may be necessary to drill holes for the
screws.
4.2.2 Installing the Wall Plate on a Ceiling Bracket (Optional)
1. Place the ceiling bracket in the position where the RBS is to be located.
2. Mark the position of the holes to be
drilled.
P018101A
3. Remove the mount and drill the
holes for the screws.
Note: Depending on the surface,
it may be possible to secure it into
position without drilling any holes.
P018102A
4. Install the bracket and secure it in position.
5
41/1531-LZA 701 0001 Uen D 2008-04-23