Ericsson MINI-LINK BAS Скачать руководство пользователя страница 5

Страница: 5 / 174

MINI-LINK BAS

EN/LZB 111 0542 P2B

Technical Description

Preface

For more information, please refer to the MINI-LINK BAS Product
Catalogue.

You may also contact your Ericsson representative or the area sales
manager for your country at:

Ericsson Microwave Systems AB
Microwave Radio Division
S-431 84 Mölndal
SWEDEN
Telephone: +46 31 747 00 00
Fax: +46 31 27 72 25

Please contact your Ericsson representative for latest details and data.

The specifications or configuration contained in this document are
subject to change without notice due to continuous design
improvement.

If there is any conflict between this document and Compliance
statements, the latter will supersede this document.

Please refer to the

“Information Revision”

document for details about

the updating level of the present description.

The MINI-LINK BAS and the relative Customer documentation have
been designed and developed by:

Ericsson Lab Italy
R&D Global Product Center
via Cadorna 73
20090 Vimodrone
Milan
ITALY.

Содержание MINI-LINK BAS















































































































































































Результаты поиска

Содержание MINI-LINK BAS

Отзывы:

Ericsson MINI-LINK BAS, Техническое описание, Страница: 5 / 174

Результаты поиска

Содержание MINI-LINK BAS

Отзывы: