Ericsson MINI-LINK BAS Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 174

Ericsson MINI-LINK BAS Скачать руководство пользователя страница 28

MINI-LINK BAS

2-6

Technical Description

EN/LZB 111 0542 P2B

2.2.1.1 FlexNU

FlexNU is the indoor part of the AT. It is connected to the ODU with
an IF coaxial cable, as shown in the Figure 2-3.

The FlexNU, which can house Modem board and Service Units (SUs),
features an active backplane on which the Media Access Control
(MAC) functionality is implemented.

FlexNU supports different types of services at each subscriber node by
means of SU boards. Two types of SUs are currently available:

•

CE-SU E1/T1 with 2 interfaces per board

•

10/100BaseT-SU with 2 interfaces per board

Up to four SUs can be inserted as plug-in modules in the FlexNU.
This gives the FlexNU service flexibility and upgrade capability. In
addition to the plug-in SUs, the FlexNU is equipped with a power
supply unit, 110/220 Vac, and a built-in Ethernet 10BaseT interface
usable for maintenance operations.

2.2.1.2 ODU

The ODU consists of a Radio and a directional antenna ”Low Profile”
parabolic type, 0.20 m., integrated within its casing.

Optionally an integrated 0.60 m antenna is available.

2.2.1.3 ACT

The AT Craft Tool (ACT) is a software application that resides in the
AT. By means of an external notebook, working in VT-100 emulation,
the ACT is used for local maintenance of the AT. The connectivity is
provided by a RS232 interface available on the FlexNU front plate.

The installation or maintenance personnel can read or set configurable
parameters locally within the AT, for example the radio frequency, the
AT and RN identification numbers.

Via ACT it is possible to execute local software download and
download swap command can be independently executed.

2.2.2 RN

The Radio Node (RN) consists of an ODU and an IDU. The ODU is
made of a Radio and a Node Antenna. The Node Antenna is either a
directional antenna for point-to-point applications or a sector antenna
for point-to-multipoint applications.

«
...
26
27
28
29
30
...
»

Содержание MINI-LINK BAS















































































































































































Отзывы:

Нет отзывов