Marconi OMS 870 R3.0 Quick Reference Guide
1/1531-CRA 119 0513/30 Uen A 2007-11-15
1-2
1.1.3
Reporting damage
Damage to shipped articles must be reported to contact resource.
1.2
Site Preparation
Verify that the installation site meets the following criteria:
•
The site conforms to all environmental specifications
•
The floor or mounting area where you will install the equipment
can support the equipment.
N O T E !
The following tables are based on typical OMS 870 system
configurations and may vary in specific customer
configurations.
1.
Power supply for the OMS 870 equipment must be available as
described in Table 2
2.
Power consumption for the OMS 870 equipment must be
supported as described in Table 2
3.
Circuit breakers for the OMS 870 equipment must be according
to Table 2
4.
Recommended clearance for accessing the OMS 870 equipment
during and after installation must be as described in Table 1 :
Table 1 Recommended Access Clearance
Table 2 Electrical specifications of DC module
Item
Recommended Clearance
Bay access needed for
maintenance
Front access only, 500 mm (19.7 in.)
Back clearance to bays (if
necessary))
500 mm (19.7 in.)
Parameter
Limit
Input power dissipation
Less than 120W
Fuse
4A
Battery voltage range
-40,5 to -72V
Output power
105W
