TO TRANSMIT A MESSAGE
1.
Turn the radio on and select the desired channel by
pushing the appropriate CHannel up
▲
or CHan-
nel down
▼
selector button to display the desired
channel.
2.
Pick up the microphone (or Push the Monitor but-
ton while the mic is on-hook) and listen to be sure
no one else is using the channel. The Monitor
button should be lit and the BUSY LED should be
out.
3.
Remove the microphone from the hook-switch and
push the PTT bar on the side of the microphone.
Speak into the microphone in a normal tone of
voice. The TX LED will light while the PTT bar is
pressed (NOTE: PTT will not operate while the
microphone is "on-hook").
4.
Terminate the call as soon as you are through by
releasing the PTT bar.
DO NOT adjust the SQUELCH control while
other parties are using the channel.
If your radio is equipped with Channel Guard,
tone or digital, push the Monitor button (if lit)
to enable the option. The CALL LED will now
be off.
NOTES
11
