OPERATION
POWER UP/DOWN
1.
Turn the radio on by rotating the volume control
1/2 turn clockwise. "4000" appears in the display
window for approximately 1 second. A power up
alert tone is then sounded for approximately 1
second to indicate proper operation of the micro-
processor. The MONITOR push-button will light
to indicate operation in the receive mode.
The display changes to indicate the priority 1 channel
(if programmed) or channel No. 1 (Ch:01).
2.
Turn the radio off by turning the VOLUME control
full counterclockwise.
RECEIVING A CALL
1.
Turn the radio on and select the desire frequency
by pressing the appropriate channel select push-
button until the desired channel is displayed.
2.
With the Monitor button lit, adjust the volume
control to a comfortable listening level.
3.
Rotate the SQUELCH control clockwise until the
squelch noise (rushing sound) is no longer heard
from the speaker and the BUSY LED goes out.
4.
Push the Monitor button. The green blacklight will
go out to indicate normal operation.
All receiver tone options are off (disabled) until
you press the MONITOR button and the
GREEN backlight goes out.
NOTE
10
