NAT Configuration
50 (98)
EN/LZT 108 6492 R1
April 2003
8
On the NAT Configuration page, click the
Submit
button. A page appears to
confirm your changes.
9
Select Admin > Commit & Reboot and click
Commit
to save your changes to
permanent storage.
8.5.6
The PASS Rule
You can create a PASS rule to allow a range of IP addresses to remain untranslated
when another rule would otherwise do so.
Figure 41: NAT Rule PASS - Add
The PASS rule must be assigned a rule ID that is a lower number than the ID assigned
to the rule it is intended to pass. If you want a specific IP address or range of
addresses to NOT be subject to an existing rule, say rule ID #5, then you can create a
PASS rule with ID #1 through 4.
1
Display the NAT Rule - Add page, select PASS as the Rule Flavor and type a
Rule ID.
2
Select the interface and, if desired, a protocol that this rule applies to.
3
In the Local Address From/To fields, type the lowest and highest IP addresses
that define the range of private addresses you want to be passed without
translation.
If you want the PASS rule to act on only one address, type that address in both
fields.
4
When you have completed entering all information, click the
Submit
button. A
page appears to confirm the change.
5
Click
Close
to return to the NAT Configuration page. The new rule should now
be displayed in the NAT Rule table.
6
On the NAT Configuration page, ensure that the Enable radio button is selected.
7
On the NAT Configuration page, click the
Submit
button. A page appears to
confirm your changes.
8
Select Admin > Commit & Reboot and click
Commit
to save your changes to
permanent storage.
Содержание HM210di
Страница 1: ...ADSL Modem HM210dp di User Guide Ericsson AB 2003 All rights reserved ADSL Modem HM210dp di User Guide...
Страница 85: ...Important Information EN LZT 108 6492 R1 85 98 April 2003 15 2 1 2 Declaration of Conformity...
Страница 86: ...Important Information 86 98 EN LZT 108 6492 R1 April 2003...
Страница 89: ...Important Information EN LZT 108 6492 R1 89 98 April 2003...
