Ericsson HL950 CES, Быстрое руководство по установке

Страница: 8 / 24

8 Physical Interfaces
NOTE! NOTE! NOTE! NOTE! NOTE! Connector 0 is implemented for single channel SHDSL over
one twisted pair or dual channel SHDSL over two twisted pairs in the
same cable. For dual-channel SHDSL with separate cables for each
channel, connect the RJ11 SHDSL cable (provided) to connector 0
and a second RJ11 SHDSL cable (not provided) to connector 1.
Connect the other end of both cables to the network operator's
SHDSL jacks.
The female RJ45 connectors each have two built-in LEDs. The left
LED (
L L L L L ink) is blinking during SHDSL training and stable lit when a link
is established. The right LED ( A A A A A ctivity) indicates data traffic.
The two RJ45 ports are also capable of accommodating male RJ11
connectors.
WIF MODULE WIF MODULE WIF MODULE WIF MODULE WIF MODULE
The slot for WIF (WAN Interface) modules is located at the bottom left
of the MSED/HL950. Modules can be slot in and are fastened by the
front panel screws.
Figure 9: Connectors/indicators on the WIF SHDSL Module
WIF SHDSL WIF SHDSL WIF SHDSL WIF SHDSL WIF SHDSL
The WIF SHDSL module provides a dual G.SHDSL interface.
Figure 8: Location of the WIF slot