Ericsson EXN401 Скачать руководство пользователя страница 30

Страница: 30 / 180

Command Line Interface

The FTP server location defined using the

ip file server

command (for more information, see “ip file server” section 2.6.8 on
page 23).

•

•
•
•
•
•
•

The TFTP connection uses the TFTP server location defined using the

file server

command (for more information, see “ip file server” section

2.6.8 on page 23).

The supported combinations are:

copy running-config startup-config

copy running-config {ftp:filename | tftp:filename}

copy startup-config {ftp:filename | tftp:filename}

copy backup-config {ftp:filename | tftp:filename}

copy backup-config startup-config

copy {ftp:filename | tftp:filename} startup-config

Default

None

Modes

Privileged EXEC

Requirement

Need a management entry point since FTP/TFTP is used.

Example

To save running configuration to startup configuration to be
taken into account on next reboot:

EXN400#

copy running-config startup-config

Example

To save running configuration on an FTP server, in file
named backup located in directory

config

EXN400#

copy running-config ftp:config/backup

2.5.7 update

Description

This command is used to update the EXN400 internal

software. The EXN400 internal software is supplied by Ericsson as a binary
file. After running this command, the EXN400 is automatically rebooted.

Syntax

update {ftp: filename | tftp: filename}

filename

Name of the file that contains the new EXN400 internal
software.

1553-LZY 214 2655 C 2004-11-24

Содержание EXN401




















































































































































































Результаты поиска

Содержание EXN401

Отзывы:

Ericsson EXN401, Руководство пользователя, Страница: 30 / 180

Результаты поиска

Содержание EXN401

Отзывы: