manualshive.com logo in svg

Ericsson EDACS M-RK I, Руководство оператора, Страница: 42 / 76

Поделиться
Скачать
Ericsson EDACS M-RK I Скачать руководство пользователя страница 42

•

The OPTION button may be programmed to toggle
scan on and off.

•

The radio will continue scanning if a new group is
selected when scan is on.

•

The currently selected group has priority over the
groups being scanned. Therefore, if the radio detects
a call on the selected group, it will switch to this group
for the duration of the call. After the caIl is compIeted,
the radio will resume scanning.

•

Depending upon programming, pressing the PTT
button when the radio is scanning wilI cause it to
transmit on the currentIy selected group or on the
scanned group (during the scan hangtime).

•

When a group call is received on one of the groups
being scanned, the radio will stop scanning, unmute
on the assigned channel, and alternately flash the
BSY/SCN indicator green and green/red. If the radio
is programmed to transmit on scanned groups, the
operator can respond (transmit) to the scanned
group call before the scan hangtime (programmable)
expires by pressing the PTT button.

•

lf a particular system is programmed to scan groups
t h a t   a r e   n o t   s e l e c t a bl e   f r o m   t h e   S Y S-
TEM/GROUP/CHANNEL knob, it will only be possi-
ble to transmit on these groups before the scan
hangtime expires.

42

Содержание EDACS M-RK I













































































Отзывы:

Нет отзывов