manualshive.com logo in svg

Ericsson EDACS M-RK I, Руководство оператора, Страница: 25 / 76

Поделиться
Скачать
Ericsson EDACS M-RK I Скачать руководство пользователя страница 25

SYSTEM/GROUP/CHANNEL SELECTION

 The M-RK l is programmed with one of the following

system/group/channel selection methods:

•

The radio is programmed with up to 16 different
system/group or channels that are selected with the
SYSTEM/GROUP/CHANNEL knob. Radios pro-
grammed in this manner use the OPTION button to
provide a toggle feature or to enable special call
mode.

•

The radio is programmed with up to 32 different
system/group or channels selected in two (2) differ-
ent banks of  16. If programmed in this manner, the
OPTION button is used to toggle between the two
banks and then the SYSTEM/GROUP/CHANNEL
knob is rotated to select the system/group or chan-
nel. No special calls can be initiated by a radio
programmed in this manner.

BUTTON REASSIGNMENT

Pre-programming the radio using the PC Program-

ming Software permits the reassignment of button and
keypad key functions. The EMERGENCY, OPTION,
CLEAR/MONITOR and PTT buttons, along with the front
panel keypad keys, can be reassigned different func-
tions.

25

Содержание EDACS M-RK I













































































Отзывы:

Нет отзывов