SITE REQUIREMENTS AND INSTALLATION INSTRUCTIONS
9 (28)
BRU1 MANUAL, Doc.no: b1sitreq Uen Rev PA5, 2004-02-19
4
Preparations Before Installation
Generally, the BRU1 can be installed at most indoor locations. However, it is
important that the BRU1 is always mounted for optimal indoor coverage and
good ventilation.
On delivery, all mounting components except screws are delivered together
with the BRU1.
4.1
Not Included Installation Material (Provided by
the Installation Contractor)
Make sure that the following required installation material is available before
the installation work is started. Check as follows:
• 3 pcs of screws for installation of the BRU1 Base Plate.
Size of screws/plugs depending on wall material. Please consider the BRU1
weight of 4 kg.
• A +24V power connection/cable.
• 1 pc of console cable.
• 1 pc of network cable (RS232/RS422 or Ethernet)
•
BRU1 - Site Documentation
.
Note:
The
Site Documentation
is not included in the electronically
published version of the
Mobitex NTE Client Library
but is
delivered on paper together with the hardware.
