Ericsson BML 161 51/021, Руководство по обслуживанию

Страница: 5 / 20

DESCRIPTION
The Universal Desk Charger is designed to charge
Ericsson personal radio battery packs. The charger has one
insert sleeve to securely hold one battery pack. The sleeve
has spring loaded electrical contacts to mate with the charg-
ing and thermistor contacts on the battery pack. The sleeves
are designed so a battery pack alone or attached to a radio
can be easily installed or removed from the charger.
The sleeve contains the charging contacts and any cir-
cuitry unique to charging a particular family of battery packs.
The sleeve is designed to easily plug into the charger base
using grooves in the base for self alignment.
Battery Pack sleeves are available for most Ericsson
personal radios including M-PA, M-PD, PCS etc. The fol-
lowing listing identifies the sleeve required for each radio.
RADIO TYPE SLEEVE
M-PA, M-PD, MTL,
PLS, TPX
BML 161 51/001
PCS BML 161 51/002
M-RK BML 161 51/003
MONOGRAM TRUNKING BML 161 51/004
PRISM HP BML 161 51/005
STANDARD CHARGER
The Standard Desk Charger is powered by a 120/220
Vac power source through the use of a plug-in power trans-
former called a "Wall Cube" power supply adapter. The
charger is capable of fully charging the battery pack in 14
hours.
The charge current for the charger is provided by the
"wall cube" step-down transformer. A series resistor, selected
by the long or short battery pack microswitch, controls the
amount of charge current. A portion of the current flows
through the CHARGE LED indicating the battery pack is
connected and is being charged.
RAPID CHARGER
The Rapid Desk Charger has a built-in power supply and
plugs directly into a 120/220 Vac power source. The charger
is capable of charging most battery packs in one hour or less.
The Rapid Charger is microprocessor controlled and
uses switching current regulators to regulate the charge cur-
rent. Battery voltage and temperature are monitored by the
microprocessor which controls the CHARGE and READY
LEDs and the charge enable transistor. Input power is applied
directly to the switching power supplies. The use of the
switching power supplies and feedback current regulation
allows the charger to operate at 120 or 220 Vac, 50 or 60 Hz
without adjustment.
ACCESSORIES AND
REPLACEMENT PARTS
The following accessories and replacement parts are
available for the Universal Desk Chargers:
Recharging any battery pack or batteries other than the
ones your equipment was designed to charge may
result in damage to equipment, leakage or explosion.
CAUTION
120 Vac Wall Transformer
BML 161 51/041
220 Vac Wall Transformer
BML 161 51/042
AE/LZB 119 1643
5