Manufacturer’s Industry Canada Conformity Statement
4
Manufacturer’s Industry Canada Conformity
Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 30 cm between the radiator and a human body.
Caution:
This device has been designed to operate with an antenna having a maximum
gain of 12 dB. Antennas having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
Table 1
BelAir20EO and AP 511x series Antennas
Type
Gain
Brand
Manufacturer
Internal omnidire
ctional antenna
4.4 dBi
Ericsson
Ericsson
Internal omnidire
ctional antenna
6.7 dBi
Ericsson
Ericsson
Internal direction
al antenna
8 dBi
Ericsson
Ericsson
Internal direction
al antenna
11.5 dBi
Ericsson
Ericsson
Internal direction
al antenna
12 dBi
Ericsson
Ericsson
External direction
al antenna
8 dBi
Ericsson
Ericsson
External direction
al antenna
11.5 dBi
Ericsson
Ericsson
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent
5
1/174 02-LZA 101 803 Uen C
|
2013-12-13
