radio will switch to the previously se-
lected group.
Manual Individual Call From Keypad
1.
Using the numeric keypad, enter the ra-
dio’s individual identification number or
recall a previously stored number. The
number is displayed in the LCD. If cur-
rently in private mode, the call will be
sent in private mode.
2.
Press and hold the PTT BUTTON. The
radio performs the necessary signaling
required to obtain a communication
channel. When the channel is obtained,
the "TX" status flag will turn on and the
channel access tone sounds.
3.
Hold the PTT BUTTON depressed and
speak into the microphone in a normal
voice.
4.
Release the PTT BUTTON when the
transmission is completed and listen for
a reply. Repeat transmissions as neces-
sary.
5.
When the call is completed, the display
will continue to show the radio’s ID until
the special call time-out expires. To re-
turn to group selection, press and re-
lease SPC or the MONITOR BUTTON.
The radio will return to the previously
selected group.
Telephone Interconnect Calls
Telephone calls programmed into the radio
can be placed using the special call feature as
follows:
1.
Press SPC. The radio enters special call
mode as indicated by the "SPC" status
flag. The last selected special call is dis-
played.
2.
Scroll through the special call table by
pressing STEP or 2nd-STEP until the
desired special call name appears in the
display.
3.
Press and release the PTT BUTTON.
The radio will perform the necessary
signaling required to obtain a communi-
28
