Scanning Trunked Groups
Groups which have been previously added to
the scan list on a per system basis may be
scanned. Each system’s scan list is retained in
memory when the radio is turned off or when the
battery pack is removed.
The radio will not scan when the emergency
mode is enabled ("EMG" status flag is on).
The following procedures outline scan opera-
tions for trunked groups. See the conventional
mode operating procedures for specific proce-
dures on conventional channel scanning.
Adding Groups To And Deleting Groups
From The Scan List
1.
Scan must be off to add groups to and
delete groups from the scan list. The
"SCN" status flag will be on if scan is on.
If necessary, toggle scan operation off by
pressing SCAN.
2.
Select the desired group to be added to
or deleted from the scan list. The "S"
status flag will be on if the group is
presently on the scan list.
3.
Toggle the "S" status flag on or off, as
desired, by pressing 2nd and then A/D
(shifted SCAN button). When the "S"
status flag is on, the group is on the scan
list. When the "S" status flag is off, the
group has been deleted from the list and
will not be scanned.
Using Scan
1.
Toggle scan operation on by pressing
SCAN. The "SCN" status flag will turn on
when the radio is scanning.
2.
When a group on the scan list receives
a channel assignment, the radio un-
squelches on the assigned channel and
the group name is displayed.
The radio will continue scanning if a new
group is selected when scan is on.
25
