SYSTEM/GROUP/CHANNEL SELECTION
The radio may be programmed with one of
two different system/group/ channel selection
modes as follows:
•
Systems are selected with the STEP but-
ton; groups and channels are selected with
the CONTROL KNOB.
or
•
Systems are selected with the CONTROL
KNOB; groups and channels are selected
with the STEP button.
STEP Button Programmed For System
Selection
CONTROL KNOB Programmed For
Group/Channel Selection
System Selection
Press and release STEP to select the next
system programmed into the radio as indicated in
the display. To select the previous system, press
and release 2nd and then press STEP. Holding
down STEP will cause the radio to automatically
scroll through the system list.
Upon reaching an end of the system list, the
radio may be programmed to stop selection or
wrap around (go from one end to the other).
Systems may also be selected by entering the
system number from the numeric keypad and
then pressing STEP. If a number out of the pro-
grammed range is entered, "RANGE" will be dis-
played.
Group/Channel Selection
After the desired system is selected with the
STEP button, rotate the CONTROL KNOB to the
desired trunked group or conventional channel as
indicated in the display. A stop-plate may be
placed under the knob which will limit the maxi-
mum positions to less than sixteen (16).
CONTROL KNOB Programmed For System
Selection
STEP Button Programmed For
Group/Channel Selection
14
