
ACeS OG698 Phone User’s Guide
Version P1C
Note:
Some features and menus are operator dependent
Page 25
The instructions in this chapter assume that you have performed setup proce-
dures described in the previous sections, have turned on your phone, and that
you are within range of a network. Also see “Select a Network Preference” on
page 15 and “Locating a Network” on page 17.
Emergency Calls
To make an emergency call:
1
Turn the phone
ON and wait for service
2
Enter 112 (or the additional emergency num-
ber you programmed into your phone, where
applicable. See “Set an Emergency Number” on
page 13.)
3
Press
YES
The display shows
Emergency.
When you
make an emergency call while in Satellite mode the call is routed
to your home network.
Note!
You can make emergency calls in GSM mode without a SIM card, but
the satellite network may require you to have a SIM card installed to make
emergency calls in satellite mode.
Domestic GSM Calls
If you set the network search preference to “GSM pref” or “GSM only”, the
search for a network begins as soon as you turn your phone on. See “Locating
a Network” on page 17.
The network search proceeds according to the preferred search pattern you set
when setting up your phone’s defaults. See “Set GSM Search Preferences” on
page 16.
To make a domestic call:
1
Enter the area code and phone number, or
recall the number from your phonebook. The dig-
its are shown in the display.
◗
If you need to erase a digit, press
CLR
◗
To erase all digits, press and hold the
CLR
key
until all digits have been erased
2
Press
YES
to make the call
Calling
displays, followed by
Connecting
◗
When the call is answered, the display shows
the elapsed time in minutes and seconds
◗
If nobody answers, the number is busy, or the
call does not go through, press
NO
. The number
is stored in memory. See “Redial a Number” on
page 36.
Making and Receiving Calls
Emergency
‚
@
112
Calling
‚
@
15555555555
Calling
‚
@
15555555555