Ericsson 19A704647P1, Руководство по обслуживанию

Страница: 8 / 16

MODIFICATION PROCEDURE
1. Unplug unit from power source.
2. Cut BRN lead near S1 and cover the short end of wire
to prevent accidental contact.
3. Strip 1/2" of insulation from long portion of BRN
lead (just cut).
4. Remove wirenut holding BLK/WHT to BRN/WHT
leads.
5. Fasten BRN and BLK/WHT leads together using
wirenut (see Diagram for 240 Volt operation).
6. Cover/insulate exposed BRN/WHT lead to prevent
accidental contact.
7. Move BLACK wire from J7 to J8.
Power supply can now be used with a 240 Volt, 50/60 Hz,
single phase source.
WIRED FOR 120 VOLT
OPERATION
WIRED FOR 240 VOLT
OPERATION
ADAPTER CABLE
Where the 19A704647P11 unit is used in a desktop station
application, an adapter cable 19B803437P1 must be used
between the power supply DC output jack and the station
power cable.
LBI-38751
8