950-109 rev A
ergonomic products • 198 Airport Rd • Fall River, MA 02720 • 866-374-6487
PAGE 23
Safe-T-Shield™ VacTrac
Model T2B1
11 – INSERTING (OR REMOVING) THE AIRFLOW PLATE
INSERTING (OR REMOVING) THE AIRFLOW PLATE
Click here for a demonstration video or go to: www.ergonomic-products.com/safe-t-shield
The stainless steel, perforated Airflow Plate should arrive pre-installed in the Manifold. If it has
become dislodged, reinstall it as shown below. Under normal use, the Airflow Plate will only need
to be removed for weekly cleaning.
To avoid scratching the underside of the Shield, remove it
prior to inserting or removing the Airflow Plate.
11.1
11.3
11.2
11.4
To insert the Airflow Plate:
1. With the Shield removed, insert one side of the Airflow
Plate behind the retaining tab.
2. Gently press the other side of the Airflow Plate straight
into the Manifold until the retaining tab clicks (fig. 11.1).
To remove the Airflow Plate (for cleaning or
replacement):
1. Remove the Shield from the Manifold (see opposite
page)
2. Depress either retaining tab holding the Plate in place
(fig. 11.2).
3. Grasp the removal ring in the center of the Plate and
pull out to remove it (figs. 11.3 & 11.4).
