10
11
10
media faceplate
USB CHARGERS
AUDIO INPUT
MAGNETIC REMOTE HOLDER
USB charging connections are
located on each side of the base.
Charge two smart devices at the
same time. The green LED light will
illuminate when the faceplate is
receiving power.
An audio input connection is
located next to the USB chargers
on the base. Use an auxiliary cable
to connect any MP3 player to the
speakers located under the base.
Read and remove warning sticker located on top of the magnet
before attaching the remote to the base.
NOTE: This product contains Neodymium MAGNETS which
may interfere with devices such as pacemakers, ICD’s and
any other device sensitive to magnetic fields. It is STRONGLY
recommended that owners of such medical devices consult their
physician prior to using this product.
11
Ensure that the Audio Power Cord attached to the sound system
is plugged into a power source (surge protector is recommended).
Once connected, use any music player on the smart device to
wirelessly stream music.
Use the device to control volume level. To further customize
volume levels, see OPTIONAL section below.
Connect any smart device with Bluetooth
®
capability to wirelessly stream music.
STEP 1
STEP 2
OPTIONAL
STEP 3
Locate Bluetooth
®
settings on the smart device. Select the
Bluetooth
®
code that begins with "SERTA SOUND-XXXXXX"
bluetooth
®
audio setup
For assistance setting up a Bluetooth® connection or operating music
player, refer to your smart device's owners manual or contact the
manufacturer directly.
To adjust master volume level:
Speakers default to medium, use the and - buttons
located on the small speakers underneath the head portion of the
platform. Use remote to lift the head portion of the base to access
the speakers. (See photo above).
To switch devices:
Turn off Bluetooth
®
on active device OR select the active device in
your Bluetooth
®
settings and press “forget this device”. You may
now pair another device.
To switch between Bluetooth
®
and Auxiliary Input:
Use the remote to lift the head portion of the base to access the
speakers. Press the SYNC button located on the small speakers
under the head portion of the base. (See photo above).
To sync two audio systems (TL or CKS):
See page 16
