Ergolux 90484, Инструкция по эксплуатации

Страница: 10 / 14

5. Plug the iron in.
6. To avoid clothes damage begin the first time ironing with an old towel.
Warning! On initial use there may be some smoke from the iron due to the lubricant presence.
Dry ironing
1. Place the iron into the vertical position on the ironing board, plug the appliance in.
2. According to the manufacturer’s instructions on the garment label, choose the proper
temperature setting.
3. If you are unsure about the fabric type, test ironing a small area on the garment and choose the
temperature setting.
4. Pilot light will go off to indicate that the required temperature is reached and iron is ready for
operation.
5. Iron delicate fabrics such as silk, wool and synthetic on the inside part of the garment to prevent
shine marks.
6. Iron velvet and glitter fabrics on a soft backing (for example, Turkish towel), in one direction.
7. After use unplug the appliance, pour the water out of the tank and let the iron get cool.
8. Store the iron vertically in the dry place.
1. Do not fill the water tank with water to a dry ironing.
2. Move the steam control knob to OFF (left position, steamless ironing).
3. Select the desired temperature.
4. The light indicator turns off when the iron is ready for operation
Operation instructions
9
Ironing with steam
1. Fill the water tank with standing or filtered water.
2. Ironing with steam is only possible when choosing the maximum heating temperature of the
soleplate. Otherwise, steam will not form, and water can flow through the soleplate.
3. Plug the steam iron in. Set the maximum temperature. Wait for the light indicator to turn off,
then the selected temperature mode has been reached.
4. Set the steam control to the middle position ON. Adjust the lever the required intensity.
Low t
о
, min
NYLON
Middle t
о
WOOL SILK
High t
о
, max
LINEN COTTON
Sy m bo l G a r men t
Synthetics, nylon
Wool, silk
Cotton, linen
Do n ot i ro n
T em p e r a tur e